However, I had another chance to do a dimensional accuracy test: a replacement keycap. So, here goes! The images are post-wash and cure, but pre-any-processing. The dimple was due to a resin bubble.
1/?
#3DPrinting
3D Printing (npub1d4n…dptf)
Koz Ross on Nostr: Some folks might remember my earlier #Resin3DPrinting experiments involving printed ...
Some folks might remember my earlier #Resin3DPrinting experiments involving printed bearings. I ended up not finishing those due to repeated failures (caused by bad resin, as it turned out). I ended up changing the resin, but life got the better of me, as usual.
However, I had another chance to do a dimensional accuracy test: a replacement keycap. So, here goes! The images are post-wash and cure, but pre-any-processing. The dimple was due to a resin bubble.
1/?
#3DPrinting
3D Printing (npub1d4n…dptf)
However, I had another chance to do a dimensional accuracy test: a replacement keycap. So, here goes! The images are post-wash and cure, but pre-any-processing. The dimple was due to a resin bubble.
1/?
#3DPrinting
3D Printing (npub1d4n…dptf)