DosFox on Nostr: I'm very very happy this worked for the first time! It's my first attempt at writing ...

I'm very very happy this worked for the first time! It's my first attempt at writing logic equations for a GAL.

It's a pretty simple affair, the outputs (the three LEDs) are latched when the 12 address lines are set to 0x806 (pulled high and low with resistors here, and then the enable line (green button on the fair right) is pulled low.

Currently driven by a 8mhz clock - I should probably check it runs at 16mhz.

Pretty simple - but I'm glad it works!